Install this pre bent 2006 Sierra brake line set in no time!

Brake Line Set Stainless Steel Sierra 3500 2 Dr DRW 2006 Reg Cab & Chassis 137" WB for 6.0L, 6.6L, and 8.1L engines.

Location: Complete set excluding Hoses and Rear Axle Crossover Line.

Please Note: Before installing your brake line, shipping bends will need to be removed from the lines labeled BLC133-01-SS, BLC133-02-SS and BLC132-03-SS. See the video below on how to remove the shipping bend.

  

OEM Part Number: 22932570

Included in Set: 1 Primary Line from rear of Master Cylinder to Lower Inboard Port of ABS, 1 Secondary Line from Front of Master Cylinder to Lower Inboard Port of ABS, 1 Left Front Line from Upper Inboard Port of ABS Motor to Left Front Wheel Hose Connection, 1 Right Front Line from Upper Middle Port of ABS Motor to the Right Front Wheel Connection (2 easy to install sections), 1 Rear Line from rear Hose Connection to Upper Outboard Port of ABS Module (2 easy to install sections), excludes Rear Axle Line

Tube Construction: Lines are constructed from Stainless Steel tubing for rust protection with original equipment end forms and fittings and are CNC (Computer Numerically Controlled) bent for an easy precise installation.

Warranty: 1 Year

Box Dimensions: 59" x 12" x 7"

We want to hear from you! Call us toll free 1-855-781-5992. We'll make sure you're ordering the correct part and we can take your order for you too. Go on give us a call.