Install this pre bent 1989 Dodge Ram Pickup brake line set in no time!

Brake Line Set Stainless Steel 1989 Dodge Ram 150/Ram 250 2WD Club Cab 8ft Bed w/Rear Mounted Pressure Limiting Valve for 5.2L engines.

Location: Master Cylinder Primary Line runs from Rear Port of Master Cylinder to Frame Mounted Proportioning Valve, Master Cylinder Secondary Line runs from Front Port of Master Cylinder to Frame Mounted Proportioning Valve, Left Front Brake Line runs from Frame Mounted Proportioning Valve to Left Front Brake Hose Connection, Right Front Brake Line runs from Frame Mounted Proportioning Valve to Right Front Brake Hose Connection, Intermediate Brake Line runs from Frame Mounted Proportioning Valve to Rear Brake Hose Connection, Rear Axle Crossover Line runs across the Rear Axle

Please Note: Before installing your brake line, a shipping bend will need to be removed from the line labeled BLD125-05A-SS and BLD157-05B-SS . See the video below on how to remove the shipping bend.

Included in Set: 1 Master Cylinder Primary Brake Line 3/16", 1 Master Cylinder Secondary Brake Line 3/16", 1 Left Front Brake Line 3/16", 1 Right Front Brake Line 3/16", 1 Intermediate Brake Line 3/16" (in 3 easy to install sections), 1 Rear Axle Crossover Line 3/16" (2 sections), Does NOT include Brake Hoses

Tube Construction: Lines are constructed from Stainless Steel tubing for rust protection with original equipment end forms and fittings and are CNC (Computer Numerically Controlled) bent for an easy precise installation.

Warranty: 1 Year

Box Dimensions: 47" x 12" x 7"

We want to hear from you! Call us toll free 1-855-781-5992. We'll make sure you're ordering the correct part and we can take your order for you too. Go on give us a call.