Shop LinesToGo for 2003 Silverado Chevrolet truck fuel lines - EZ Install Fuel Line Set Stainless Steel C/K Series 2500HD/3500 Ext Cab 6.5ft & 8ft Bed 2WD & 4WD w/Fuel Cooler Line w/engine code LB7 (Eighth VIN Digit # 1) for 6.6L Duramax Diesel 

Not Included in Set: Hoses between fuel line and fuel tank 5070-01 and Cooler Connector Lines FL591-A1 or SS591-A1. These parts are available for purchase separately.

Please Note: Original equipment Silverado/ Sierra front fuel line sections can be difficult to install from the engine connections down to the frame rail. These LinesToGo 887 Series come with front flexible stainless steel braided Teflon hoses, making a difficult and time consuming job, a whole lot easier and faster. Routing clips and hardware included.

Location: Engine to Hose Connection at Fuel Tank

Installation Video:

Removal and Installation of SS887-B

Please Note: If you have purchased an aftermarket replacement fuel cooler, the fuel cooler connector lines attached to the fuel cooler may be different than the OEM fuel cooler connector lines. As shown in Illustration A, the aftermarket fuel cooler connector lines are made with a straight sharp edge. When these are plugged into the fuel cooler line, they will cut the O-ring inside the connector causing a leak. If you wish to replace the fuel cooler connector lines before installation of the fuel cooler line, they are available to purchase under part number FL591-A  as shown in Illustration B.

We are unable to warranty any of our products that are damaged by aftermarket fuel cooler connector lines.

Illustration A                                                                             Illustration B

Aftermarket fuel cooler connector line:                         LinesToGo FL591-A fuel cooler connector line:

Straight Sharp Edge                                                                  Rounded Beveled Edge

OEM Part Number: 15169342

Included in Set: 1 supply hose 1/2" (Stainless Steel Braided Teflon Flexible Line for easy installation), 1 supply line 1/2" (in 2 easy to install sections), 1 return hose 3/8" (Stainless Steel Braided Teflon Flexible Line for easy installation), 1 return line 3/8", 1 fuel cooler line 3/8", hose to fuel cooler connection, 3 bolts, 3 clamps, 3 nuts, 1 union. Does NOT include fuel cooler connector lines that thread into the fuel cooler and the tank unit connector lines from fuel tank to fuel line.

Tube Construction: Lines are constructed from Stainless Steel Tubing for rust protection with original equipment end forms and fittings and are CNC (Computer Numerically Controlled) bent for an easy precise installation.

Hose Construction: All hoses are made from Stainless Steel Braided Teflon with OE style fittings

Warranty: 1 Year

Box Dimensions: 47" x 12" x 7"

We want to hear from you! Call us toll free 1-855-781-5992. We'll make sure you're ordering the correct part and we can take your order for you too. Go on give us a call.