Install this pre bent 2004 Blazer S10 brake line set in no time!

Brake Line Set Stainless Steel Chevy Blazer S10 2WD 2 Dr w/4 Wheel Disc Brakes for 4.3L engines exc. ZR2 Model.

Location: Master Cylinder Primary Line runs from Rear of Master Cylinder to ABS Motor, Master Cylinder Secondary Line runs from Front of Master Cylinder to ABS Motor, Left Front Brake Line runs from Rear Port of ABS Motor to Left Front Brake Hose Connection, Right Front Brake Line runs from Middle Port of ABS Motor to Right Front Brake Hose Connection, Intermediate Brake Line runs from Front Port of ABS Motor to Rear Axle Brake Hose Connection, Rear Axle Brake Line runs across the Rear Axle

Please Note: Before installing your brake line, a shipping bend will need to be removed from the line labeled BLC193-05C-SS. See the video below on how to remove the shipping bend.

Included in Set: 1 Master Cylinder Primary Brake Line 1/4", 1 Master Cylinder Secondary Brake Line 1/4", 1 Left Front Brake Line 1/4", 1 Right Front Brake Line 1/4" (in 2 easy to install sections), 1 Intermediate Brake Line 1/4" (in 3 easy to install sections), 1 Rear Axle Crossover Line 3/16" (2 sections), Does NOT include Brake Hoses

Tube Construction: Lines are constructed from Stainless Steel tubing for rust protection with original equipment end forms and fittings and are CNC (Computer Numerically Controlled) bent for an easy precise installation.

Warranty: 1 Year

Box Dimensions: 38" x 12" x 7"

We want to hear from you! Call us toll free 1-855-781-5992. We'll make sure you're ordering the correct part and we can take your order for you too. Go on give us a call.