Search
Install this pre bent 2003 Sierra brake line set in no time!
Brake Line Set Stainless Steel Sierra 1500 2WD Ext Cab 6.5ft Bed w/4 Wheel Disc Brakes w/Coil Front Springs w/o Quadrasteer exc. Rear Axle Crossover Line and Hoses, for engines 4.3L, 4.8L, 5.3L, 6.0L engines
Please Note: Before installing your brake line, a shipping bend will need to be removed from the lines labeled BLC104-01-SS, BLC104-02-SS, BLC106-03-SS, BLC106-04A-SS, BLC103-05A-SS, and BLC103-05B-SS. See the video below on how to remove the shipping bend
1 Master Cylinder Primary Line from Rear of Proportioning Valve to Lower Inboard Port of ABS Module, 1 Master Cylinder Primary Line from Rear of Master Cylinder to Rear of Proportioning Valve Port, 1 Master Cylinder Secondary Line from Front Proportioning Valve to Lower Outboard Port of ABS Module, 1 Master Cylinder Secondary Line from Front of Master Cylinder to Front of Proportioning Valve, Left Front Line from Front Hose Connection to Upper Inboard Port of ABS, Right Front Line from Front Hose Connection to Upper Middle Port of ABS (4 easy to install sections), Rear Line from Rear Hose Connection to Upper Outboard Port of ABS Module (2 easy to install section), Excludes Rear Axle Crossover Line
Lines are constructed from Stainless Steel tubing for rust protection with original equipment end forms and fittings and are CNC (Computer Numerically Controlled) bent for an easy precise installation
Need Assistance? Call us toll free 1-855-781-5992
We'll make sure you're ordering the correct part and we can take your order for you too.
