Install this pre bent 2002 Yukon brake line without a problem!

Stainless Steel Brake Line Set Yukon 2002 1500 116" WB 4 Dr w/o Active Brake Control for 4.8L engines.

Please Note: Before installing your brake line, shipping bends will need to be removed from the lines labeled BLC164-01-SS, BLC164-02-SS and BLC164-04A-SS. See the video below on how to remove the shipping bend.

OEM Part Number: 22933217

Included in Set: 1 Master Cylinder Primary Line from Rear of Master Cylinder to Lower Inboard Port of ABS Module, 1 Master Cylinder Secondary Line from Front of Master Cylinder to Lower Outboard Port of ABS Module, 1 Left Front Line from Hose Connection to Upper Inboard Port of ABS Module, 1 Right Front Line from Hose Connection to Upper Middle Port of ABS Module (2 easy to install sections), 1 Rear Line from Rear Hose Connection to Upper Outboard Port of ABS Module (2 easy to install sections), Excludes Rear Axle Crossover Line

Tube Construction: Lines are constructed from Stainless Steel tubing for rust protection with original equipment end forms and fittings and are CNC (Computer Numerically Controlled) bent for an easy precise installation.

Warranty: 1 Year

Box Dimensions: 57" x 11" x 7"

We want to hear from you! Call us toll free 1-855-781-5992. We'll make sure you're ordering the correct part and we can take your order for you too. Go on give us a call.