Install this pre bent 2001 Sierra brake line set in no time!
Brake Line Set Stainless Steel 2001 Sierra 3500 4WD 2 Dr Reg Cab & Chassis 137" WB w/DRW for 6.0L, 6.6L and 8.1L engines.
Location: Complete set excluding Hoses and Rear Axle Crossover Line.
Please Note: Before installing your brake line, shipping bends will need to be removed from the lines labeled BLC149-01-SS, BLC149-02-SS, BLC132-03-SS and BLC132-04A-SS. See the video below on how to remove the shipping bend.
OEM Part Number: 22933198
Included in Set: 1 Master Cylinder Primary Line from Rear of Master Cylinder to Lower Inboard Port of the ABS Module, 1 Master Secondary Line from Front of Master Cylinder to Lower Outboard Port of the ABS Module, Left Front Line from Hose Connection to Upper Inboard Port of the ABS, Right Front Line from Hose Connection to Upper Middle Port of the ABS (2 easy to install sections), Rear Line from Hose Connection to Upper Outboard Port of the ABS Module (2 easy to install sections), Excludes Rear Axle Crossover Line
Tube Construction: Lines are constructed from Stainless Steel tubing for rust protection with original equipment end forms and fittings and are CNC (Computer Numerically Controlled) bent for an easy precise installation.
Warranty: 1 Year
Box Dimensions: 59" x 12" x 7"
We want to hear from you! Call us toll free 1-855-781-5992. We'll make sure you're ordering the correct part and we can take your order for you too. Go on give us a call.
OEM Part Number: 22933198
Included in Set: 1 Master Cylinder Primary Line from Rear of Master Cylinder to Lower Inboard Port of the ABS Module, 1 Master Secondary Line from Front of Master Cylinder to Lower Outboard Port of the ABS Module, Left Front Line from Hose Connection to Upper Inboard Port of the ABS, Right Front Line from Hose Connection to Upper Middle Port of the ABS (2 easy to install sections), Rear Line from Hose Connection to Upper Outboard Port of the ABS Module (2 easy to install sections), Excludes Rear Axle Crossover Line
Tube Construction: Lines are constructed from Stainless Steel tubing for rust protection with original equipment end forms and fittings and are CNC (Computer Numerically Controlled) bent for an easy precise installation.
Warranty: 1 Year
Box Dimensions: 64" x 12" x 7"
We want to hear from you! Call us toll free 1-855-781-5992. We'll make sure you're ordering the correct part and we can take your order for you too. Go on give us a call.
