Pontiac Grand Prix Base Fuel Line Set 2008 3.8L FL252-B3B

w/o California Emissions System

Pontiac Grand Prix Base Fuel Line Set 2008 3.8L FL252-B3B
Pontiac Grand Prix Base Fuel Line Set 2008 3.8L FL252-B3B
Pontiac Grand Prix Base Fuel Line Set 2008 3.8L FL252-B3B
Pontiac Grand Prix Base Fuel Line Set 2008 3.8L FL252-B3B
Pontiac Grand Prix Base Fuel Line Set 2008 3.8L FL252-B3B
Pontiac Grand Prix Base Fuel Line Set 2008 3.8L FL252-B3B
Pontiac Grand Prix Base Fuel Line Set 2008 3.8L FL252-B3B
Pontiac Grand Prix Base Fuel Line Set 2008 3.8L FL252-B3B
Pontiac Grand Prix Base Fuel Line Set 2008 3.8L FL252-B3B
Pontiac Grand Prix Base Fuel Line Set 2008 3.8L FL252-B3B
Pontiac Grand Prix Base Fuel Line Set 2008 3.8L FL252-B3B

Pontiac Grand Prix Base Fuel Line Set 2008 3.8L FL252-B3B

w/o California Emissions System

SALE: from
from
Save $49.24
from /

Delivery Time & Rates

Shipping calculated at checkout.

Install this pre bent 2008 Pontiac Grand Prix Base fuel line without a problem!

Grand Prix Base Fuel Line Set 08 w/o California Emissions Systems for 3.8L engine.

Please Note: Before installing your fuel line, a shipping bend will need to be removed from the lines labeled SA252A375AB and SA252B375B2. See the video below on how to remove the shipping bend.

Nylon Line Attached to Vapor Line

The nylon line attached to the new vapor line is not a direct replacement. It is only a section of nylon line that will splice to the original nylon line on the vehicle.

On the opposite end of the original nylon line, there are connectors. These connectors may be damaged during removal. If so, we offer repair kits with new OEM connectors. These will, also, need to be spliced onto the original nylon line.

Nylon Repair Kits

3070-01 includes 2 - 3/8” Nylon Lines, 180° quick connectors

6093-01 includes 1 - 3/8" Nylon Line, 1 Union, 1 90° Quick Connector

SKU: FL252-B3B
Box Dimensions 39" x 11" x 7"

Engine to Hose Connection off Fuel Tank

1 supply line 3/8" (in 2 easy to install sections), 1 vapor line 3/8" (in 2 easy to install sections), 2 unions

15923819, 15943693

Lines are constructed from Galfan® coated steel tubing for rust protection with original equipment end forms and fittings and are CNC (Computer Numerically Controlled) bent for an easy precise installation.

All hoses are made from Stainless Steel Braided Teflon with OE style fittings

Need Assistance? Call us toll free 1-855-781-5992

We'll make sure you're ordering the correct part and we can take your order for you too.

Complete The Job With

Overall rating: 5.0 / 5 from 6 reviews.

AI Generated Review Summary

Summary topics

Review topics: ["lines"].

Review highlights

Reviews

Perfect

"Exactly what I needed and fit properly."

KELSIE W. (5/5)

Good enough

"Good enough"

Kameron M. (5/5)

Worked out great!!

"The lines worked very well on my 2008 Grand Prix WITH California emissions. I was taking a chance since the listing says it’s for non-California cars only, but I had no other option. The differences seem to just be at the fuel tank and nylon lines only. In comparing the hard lines side by side with the originals, it was nearly a perfect match. The only issue I had was the braided flex section is about 2” longer than needed. It therefore rests against the firewall and transmits injector noise into the interior. Some plastic loom took care of that. Overall A+, quick to ship, and I loved the 2 piece design that allowed more ability to contort the line up under the hood. I went in from the bottom of the car."

Brian P. (5/5)

Worked great! Love these Replacement Lines!

"This is the second time I have used LinesToGo and I am impressed again at the quality of the lines and near factory accuracy of the bends. I only ended up having to slightly tweak some of them to get these replacement lines to fit into the factory retainers. The flared unions are placed in the most appropriate positions as well. I will continue to use this manufacturer for future replacements. The State of Maine is more strict now on annual vehicle inspections regarding brake and fuel lines. Any flaking rust that can be seen is a FAIL and you need to replace the lines. I like using pre-bent lines versus having to bend your own or use braided fuel lines. Much cleaner look and safer in my opinion versus taking the chance of kinking ones you bend yourself (brake lines) or using the wrong flare type for your fuel lines and also having braided lines zip-tied to non-standard mounting locations underneath the car. A++"

Michael R. (5/5)

Well made perfect ! Fit

"Well made perfect ! Fit my car perfectly."

Jodie W. (5/5)

The new lines came very

"The new lines came very quickly. Installation was a little bit of a pain. In the installation video it looks really easy to get the lines down the firewall but in my car the brake lines go every which way. So I ended up going through from the bottom. I couldn’t get all the line holders along the firewall to match up with the new lines but, I don’t think you need to use all of them anyways. The holder’s on the bottom fit ok. I had trouble with the quick connects by the fuel tank not releasing off the old lines. They finally came off and they pulled the O-rings and spacers out. I put them back on the new lines and then I couldn’t get them to click back on. I ended up bringing it to a shop and they somehow got them to click on. Overall I’m very happy with the quality of the lines"

Tim W. (5/5)

Q&A