Mercedes S550 Brake Line Repair Kit 2012 4.7L BLMB-104-SS1E Stainless Steel
Model Code: W221 w/124.6" WB
Mercedes S550 Brake Line Repair Kit 2012 4.7L BLMB-104-SS1E Stainless Steel
Model Code: W221 w/124.6" WB
Delivery Time & Rates
Install this pre bent 2012 Mercedes S550 (W221) brake line set in no time!
Please Note: Brake Line Repair Kit Installation Video MUST be watched PRIOR to attempting Installation
This kit requires you to flare 3 brake lines. The right front line is a complete replacement, however the two rear lines and the left front line are partial lines that replace the common trouble areas where the lines are exposed to the elements and corrode.
This is a relatively involved installation, however replacing all of the lines as complete lines would be extremely difficult.
This kit requires the use of a small tubing cutter and a flare brake line flaring kit.
Please Note: Before installing your brake line, shipping bends will need to be removed from the lines labeled BLMB104-05B-SS and BLMB104-06B-SS. See the video below on how to remove the shipping bend
Stainless Steel Brake Line Repair Kit 2012 Mercedes-Benz S550 (W221) w/124.6" WB for 4.7L engines.
- Weight: 4
- Installation Instructions
Left Front Brake Line runs from Original Section Underneath Master Cylinder to Left Front Brake Hose Connection, Right Front Brake Line runs from ABS Motor to Right Front Brake Hose Connection, Left Rear Brake Line runs from Original Section Under Passenger Side Front of Vehicle to Left Rear Brake Hose Connection, Right Rear Brake Line runs from Original Section Under Passenger Side Front of Vehicle to Right Rear Brake Hose Connection
1 Left Front Brake Line 3/16", 1 Right Front Brake Line 3/16", 1 Left Rear Brake Line 3/16" (in 3 easy to install sections), 1 Right Rear Brake Line 3/16" (in 3 easy to install sections), Does NOT include Brake Hoses - PLEASE NOTE - This is a Repair Kit. Product Description and Installation Video MUST be reviewed prior to purchase and installation.
Lines are constructed from Stainless Steel tubing for rust protection with original equipment end forms and fittings and are CNC (Computer Numerically Controlled) bent for an easy precise installation
Need Assistance? Call us toll free 1-855-781-5992
We'll make sure you're ordering the correct part and we can take your order for you too.