Cadillac DeVille Fuel Line Set 2001 4.6L SS251-C1B Stainless Steel
w/4th and 5th VIN Digits KD, KE or KF
Cadillac DeVille Fuel Line Set 2001 4.6L SS251-C1B Stainless Steel
w/4th and 5th VIN Digits KD, KE or KF
Delivery Time & Rates
Delivery Time & Rates
Install this pre-bent 2001 Cadillac DeVille fuel line set in no time!
Stainless Steel Fuel Line Set 2001 Cadillac DeVille w/the 4th and 5th VIN digits KD, KE or KF for 4.6L engines.
Retainer Clips Included On Lines: The retainer clips provided on the replacement lines may not be needed. The replacement lines will plug into connectors which have retainer clips inside them.
Sometimes during removal of the OEM lines, the retainer clips inside the connectors may be damaged. If this is the case, you will need to leave the retainer clips on the replacement lines.
If the retainer clips remain inside the connector undamaged during removal of the OEM lines, you will not require the retainer clips provided on the replacement lines. The retainer clips will need to be removed before plugging into the connector.
Nylon Line Attached to Vapor Line: There is a small section of nylon line included which is attached to the vapor line. It is only a section of nylon that will splice to the original nylon line on the vehicle.
Nylon Lines: We do not produce pre-formed nylon lines and they are not included with your fuel lines. However, repair kits are available which will attach to your existing nylon lines providing new connectors for the fuel supply and return lines. The original connections are often seized and damaged during install.
Nylon Repair Kits
3068-01 - 2 x Nylon Lines 5/16", 2 Unions 5/16", 2 Connectors 5/16" @ 180 degrees
- Weight: 6
Engine to Hose Connection at Fuel Tank
1 Supply Line 3/8" (in 2 easy to install sections), 1 Return Line 5/16" (in 2 easy to install sections), 1 Vapor Line 5/16" (in 2 easy to install sections), Hoses to Engine Connection, Nylon Line with Unions, 3 Unions, 1 Fuel Filter
Lines are constructed from Stainless Steel tubing for rust protection with original equipment end forms and fittings and are CNC (Computer Numerically Controlled) bent for an easy precise installation.
All hoses are made from Stainless Steel Braided Teflon with OE style fittings
Avoid Ordering The Wrong Part