Buick LaCrosse CXL Fuel Line Set 2007 3.8L FL252-B8A

4 Dr w/4 Wheel Disc Brakes w/o California Emissions System

Buick LaCrosse CXL Fuel Line Set 2007 3.8L FL252-B8A
Buick LaCrosse CXL Fuel Line Set 2007 3.8L FL252-B8A
Buick LaCrosse CXL Fuel Line Set 2007 3.8L FL252-B8A
Buick LaCrosse CXL Fuel Line Set 2007 3.8L FL252-B8A
Buick LaCrosse CXL Fuel Line Set 2007 3.8L FL252-B8A
Buick LaCrosse CXL Fuel Line Set 2007 3.8L FL252-B8A
Buick LaCrosse CXL Fuel Line Set 2007 3.8L FL252-B8A
Buick LaCrosse CXL Fuel Line Set 2007 3.8L FL252-B8A
Buick LaCrosse CXL Fuel Line Set 2007 3.8L FL252-B8A
Buick LaCrosse CXL Fuel Line Set 2007 3.8L FL252-B8A
Buick LaCrosse CXL Fuel Line Set 2007 3.8L FL252-B8A
Buick LaCrosse CXL Fuel Line Set 2007 3.8L FL252-B8A
Buick LaCrosse CXL Fuel Line Set 2007 3.8L FL252-B8A
Buick LaCrosse CXL Fuel Line Set 2007 3.8L FL252-B8A
Buick LaCrosse CXL Fuel Line Set 2007 3.8L FL252-B8A
Buick LaCrosse CXL Fuel Line Set 2007 3.8L FL252-B8A
Buick LaCrosse CXL Fuel Line Set 2007 3.8L FL252-B8A
Buick LaCrosse CXL Fuel Line Set 2007 3.8L FL252-B8A
Buick LaCrosse CXL Fuel Line Set 2007 3.8L FL252-B8A
Buick LaCrosse CXL Fuel Line Set 2007 3.8L FL252-B8A
Buick LaCrosse CXL Fuel Line Set 2007 3.8L FL252-B8A
Buick LaCrosse CXL Fuel Line Set 2007 3.8L FL252-B8A

Buick LaCrosse CXL Fuel Line Set 2007 3.8L FL252-B8A

4 Dr w/4 Wheel Disc Brakes w/o California Emissions System

SALE:
Save $49.24
/

Delivery Time & Rates

Shipping calculated at checkout.

Install this pre bent 2007 Buick LaCrosse CXL fuel line without a problem!

LaCrosse CXL Fuel Line Set 07 4 Door Only w/4 Wheel Disc Brakes w/o California Emissions System for 3.8L engines.

Please Note: Before installing your fuel line, a shipping bend will need to be removed from the lines labeled SA252A375AB and SA252B375B2. See the video below on how to remove the shipping bend.

Nylon Line Attached to Vapor Line

The nylon line attached to the new vapor line is not a direct replacement. It is only a section of nylon line that will splice to the original nylon line on the vehicle.

On the opposite end of the original nylon line, there are connectors. These connectors may be damaged during removal. If so, we offer repair kits with new OEM connectors. These will, also, need to be spliced onto the original nylon line.

Nylon Repair Kits

3070-01 includes 2 - 3/8” Nylon Lines, 180° quick connectors

6093-01 includes 1 - 3/8" Nylon Line, 1 Union, 1 90° Quick Connector

SKU: FL252-B8A
Box Dimensions 39" x 11" x 7"

Engine to Hose Connection off Fuel Tank

1 supply line 3/8" (in 2 easy to install sections), 1 vapor line 3/8" (in 2 easy to install sections), 2 unions

15923819, 15943693

Lines are constructed from Galfan® coated steel tubing for rust protection with original equipment end forms and fittings and are CNC (Computer Numerically Controlled) bent for an easy precise installation.

All hoses are made from Stainless Steel Braided Teflon with OE style fittings

Need Assistance? Call us toll free 1-855-781-5992

We'll make sure you're ordering the correct part and we can take your order for you too.

Complete The Job With

Sale
3070-01 Nylon Line Repair Kit 2 Nylon Lines 3/8"
Save $13.75
Sale
Buick LaCrosse Transmission Line Set 2007 3.8L TCL-147-SS1C Stainless Steel
Save $37.24
Sale
Quick Disconnect Tool, Steel 3/8" & 5/16" 5230-01
Save $3.12

Overall rating: 4.6666665 / 5 from 6 reviews.

AI Generated Review Summary

Summary topics

Review topics: [shipping].

Review highlights

Reviews

2007 lacrosse fuel line

"Fit like original"

— larry k. (5/5)

Nice fitment

"Nice fitment"

— mike v. (5/5)

It would have made it

"It would have made it a little easier if you would have said something about installing the front pieces from underneath the car. Other than that it went as good as I could expect."

— Pat H. (5/5)

The lines are good. But,

"The lines are good. But, the installation video was for a base model car without anti-lock brakes. With anti-lock brakes the installation is a lot harder to do, because the lines run between the engine firewall and the anti-lock pump module (around one inch clearance). There are three line brackets to remove where as the video shows one. The lines must be installed from the bottom, not the top. This requires another person to help guide the lines into their proper place. So, its not as quick and easy as described in the video. Also, if the lines have a lot of rust, order the connection repair lines, you will be glad you did. If you want two day shipping order the items before Thursday, after that it is four or five days for shipment. FedEx isn't the greatest shipper. When they say the shipment will be delivered between 3 and 8 PM-more than likely 8 PM."

— Judy W. (5/5)

Lines are good quality but

"Lines are good quality but possibly configured for Canadian lacrosse,install video makes installation easy when its extremely hard and a mechanic should put these in.There is no way the 2 front lines can be installed frib the top engine compartment.The front lines needto be installed from the bottom with rear sub frame lowered 4-5" The main lines that run back to tank the purge line is bent upwards where it curves this needs to be bent,the fuel pressure line is around 1 1/2" to long and won't mount back into lowest plastic clip holder Video is very deceiving and made to look easy it's hard. There are 3 plastic holding clip they only show 3, 1 is just below but stick out by brake booster,this hold both fuel lines and 2 brakes lines not mentioned,this is why you can't install from the front going down. In video if you will also notice they have the ABS controller off the car this is where the 2nd plastic holding clip is very hard to get to from under the car which is the only way to get to it,this rates 90% for product material and 20% for video install"

— James B. (3/5)

Great product, quick delivery, everything

"Great product, quick delivery, everything you need"

— Dale B. (5/5)

Q&A