Install this pre bent 2006 Mitsubishi Endeavor brake line set in no time!

Brake Line Set Stainless Steel Mitsubishi Endeavor w/ABS for 3.8L engines.

Location: Master Cylinder Primary Line runs from Master Cylinder to ABS Motor, Master Cylinder Secondary Line runs from Master Cylinder to ABS Motor, Left Front Brake Line runs from ABS Motor to Left Front Brake Hose Connection, Right Front Brake Line runs from ABS Motor to Right Front Brake Hose Connection, Left Rear Brake Line runs from ABS Motor to Lower Firewall Brake Union and then to Left Rear Brake Hose Connection, Right Rear Brake Line runs from ABS motor to Lower Firewall Brake Union and then to Right Rear Brake Hose Connection

Please Note: Before installing your brake line, a shipping bend will need to be removed from the lines labeled BLMT100-05B-SS and BLMT100-06B-SS. See the video below on how to remove the shipping bend.

Included in Set: 1 Master Cylinder Primary Brake Line 3/16", 1 Master Cylinder Secondary Brake Line 3/16", 1 Left Front Brake Line 3/16", 1 Right Front Brake Line 3/16", 1 Left Rear Brake Line 3/16" (in 3 easy to install sections), 1 Right Rear Brake Line 3/16" (in 4 easy to install sections), Does NOT include Brake Hoses

Tube Construction: Lines are constructed from Stainless Steel tubing for rust protection with original equipment end forms and fittings and are CNC (Computer Numerically Controlled) bent for an easy precise installation.

Warranty: 1 Year

Box Dimensions: 47" x 12" x 7"

We want to hear from you! Call us toll free 1-855-781-5992. We'll make sure you're ordering the correct part and we can take your order for you too. Go on give us a call.