"LTG stainless transmission cooler line set with two ptfe lined rubber hoses . The original lines run only down the Left side of the engine and require removing the catalytic converters to remove and install the original design cooler lines . These connect to transmission on the left side but route under the oil pan and then foward to the radiator on the wide open right side of the engine . No cat converter removal required . Just cut the leaking old lines in pieces and pull them out and install the new lines . Plus they cost less than the original lines do . These are the only ones I recommend to my customers."

— Kerry (5/5)

Transmission cooler lines.

"Purchased these for 2006 wrangler 4. 0. Lines are of quality construction, however fit is not as advertised. My lower line had to ve bent because it would rub on front driveshaft ever time I hit a bump or brakes were applied. Instructions show supplied clamp that is suppose to secure lines on right side of oil pan stud. No such stud exists and even if it did lines fit so poorly along oil pan you could never attach supplied clamp"

— Arthur C. (3/5)

Not really an “easy” install,

"Not really an “easy” install, if the vehicle is on jack stands. Having said that the tubing bends are accurate and the routing of lines is great, moved away from exhaust."

— Raymond H. (4/5)