Too long
"Too long"
Search
Compre en LinesToGo para su camioneta GMC Sierra 2000. Nuestro juego de líneas de combustible FL488-H2A está diseñado para camionetas 1500 con cabinas regulares y motores de combustible no flexible de 4.8L.
Juego de líneas de combustible 2000 GMC Sierra 1500 Reg Cab caja de 6.5 pies/8 pies 2WD y 4WD para motores de 4.8L sin combustible flexible.
Ubicación: Conexión del motor a la manguera del tanque de combustible
Conductos de nailon entre las líneas de combustible y el tanque de combustible:
Las líneas de nailon entre la línea de combustible y el tanque de combustible no están incluidas. No fabricamos líneas de nailon para este vehículo. Sin embargo, puede comprar un kit de reparación de nailon, 3069-01 , que se conectará a su línea de nailon existente y proporcionará un nuevo conector para las líneas de suministro y retorno.
Instrucciones de instalación de nailon:
Paso 1
Corte la nueva manguera de nailon en la misma posición que la manguera de nailon original.
Paso 2
Corte la manguera de nailon original en la misma posición que la nueva manguera de nailon.
Paso 3
Utilice la manguera de nylon original con conector y conéctela con la unión suministrada a la nueva manguera de nylon.
Número de pieza OEM: 15765805
Incluido en el juego: 1 línea de suministro de 3/8" (en 2 secciones fáciles de instalar), 1 línea de retorno de 5/16" (en 2 secciones fáciles de instalar), 1 línea de vapor de 5/16" (en 2 secciones fáciles de instalar), mangueras para conexión al motor, mangueras para unir secciones traseras y delanteras, 1 filtro de combustible
Construcción del tubo: Las líneas están construidas con tubos de acero revestidos con Galfan® para protección contra la oxidación con formas de extremo y accesorios de equipo original y están dobladas mediante CNC (control numérico por computadora) para una instalación fácil y precisa.
Construcción de la manguera: Todas las mangueras están hechas de teflón trenzado de acero inoxidable con accesorios estilo OE
Garantía: 1 año
Dimensiones de la caja: 39" x 11" x 7"
¡Queremos saber de usted! Llámenos sin cargo al 1-855-781-5992. Nos aseguraremos de que solicite la pieza correcta y también podemos tomar su pedido por usted. Llámenos.
Overall rating: 4.2727275 / 5 from 11 reviews.
Review topics: [fit, quality, install, work, lines, leaks].
"Too long"
"The Lines were bent correctly and the online videos are informative. Worked great!"
"I installed the line set in my 2000 GMC Sierra 4x4 with a regular cab. The lines were a perfect fit and I can highly recommend them. The installation was a lot harder than I was expecting. Here is what I had to do. I removed the front driveshaft, transfer case shifter, and a small heat shield on the firewall. I also removed the rear transmission mount so I could lower the transmission a few inches. All this was to get clearance to jockey the lines around up to the rear of the engine. They are a very tight fit between the transmission and the cab. I already had the fuel tank out to replace the fuel pump and that gave some extra clearance for the rear section of the lines. I hope this info can help someone out doing the same job. If I had known what I needed to remove I could have done the job in a lot less time."
"Every thing worked well thank you"
"Flawless, cheaper and easier to install than the 1 piece GM lines."
"Some of the bends in the upper set were way off."
"Worked out Fantastic ! Top notch quality ! Very happy with start to finish . Highly recommend and you have a long-time customer !!"
"The fuel lines fit properly and no leakage. Great job"
"Very good quality. Difficult installation in tight conditions, but anything would be. Being able to install each line individually is helpful. Attached to tank and engine compartment with no leaks. We did have a communication problem though. I also needed the nylon EVAP line to the engine. I specified that when I ordered and was told it was included, only to find that it was not. When I called back, I was told that you don't include that. This makes it difficult to do the complete job with your products. Had to order the EVAP line from the dealer. Thanks for a very good product."
"I had a few issues with this project, first 2 of the flex lines where not in the box when I received it. After sending an a message, the 2 lines were at my door the next day, great customer service. The only other issue was the supply line was missing one bend but I was able to bend the line manually. In the end, the price was good and the product worked well."