Close

Site Information

Find Your Part NOW!
Search By Model
Search By Vin
  • Buick Regal Base/GS/LS  Fuel Line 1999 4 Door 3.8L (K)
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
Free Shipping

Buick Regal Base/GS/LS Fuel Line 1999 4 Door 3.8L (K) FL254-A1C Set

$174.94 $139.95
(You save $34.99)
SKU:
FL254-A1C
Weight:
4.00 LBS
Quantity:

Installation Tips

Important Product Information

Quality matters. Shop with LinesToGo for 1999 replacement Regal fuel lines

Fuel Line Set 99 Buick Regal Base/GS/LS 4 Door 3.8L (K)

Location: Engine to Hose Connection off Fuel Tank

Nylon Line Attached to Vapor Line

The nylon line attached to the new vapor line is not a direct replacement. It is only a section of nylon line that will splice to the original nylon line on the vehicle.

On the opposite end of the original nylon line, there are connectors. These connectors may be damaged during removal. If so, we offer repair kits with new OEM connectors. These will, also, need to be spliced onto the original nylon line.

Nylon Repair Kits

3068-01 includes 2 – 5/16” Nylon Lines, 180° quick connectors

3069-01 includes 1 - 3/8” Nylon Line, 1 - 5/16” Nylon Line, 180° quick connectors

3070-01 includes 2 - 3/8” Nylon Lines, 180° quick connectors

3071-01 includes 1 - 3/8” Nylon Line, 1 - 5/16” Nylon Line, 90° quick connectors

Nylon Installation Instructions:

Step 1

image-1a.jpg

Cut the new nylon hose in the same position as the original nylon hose.

Step 2

image-2a.jpg

Cut the original nylon hose in the same position as the new nylon hose.

Step 3

image-3a.jpg

Use the original nylon hose with connector and attach it with supplied union to the new nylon hose.

OEM Part Number10330348, 10330347, 10346522

Included in Set: 1 supply line 3/8" (in 2 easy to install sections), 1 return line 5/16" (in 2 easy to install sections), 1 vapor line 5/16" (in 2 easy to install sections), hoses to engine connection, nylon line with union, 3 unions, 1 fuel filter

Tube Construction: Lines are constructed from Galfan® coated steel tubing for rust protection with original equipment end forms and fittings and are CNC (Computer Numerically Controlled) bent for an easy precise installation.

Hose Construction: All hoses are made from Stainless Steel Braided Teflon with OE style fittings

Warranty: 1 Year

Box Dimensions: 69" X 12 X 7"

We want to hear from you! Call us toll free 1-855-781-5992. We'll make sure you're ordering the correct part and we can take your order for you too. Go on give us a call.

User Installation Tips

Write Your Own Installation Tip

This product hasn't received any tips yet. Be the first to submit one for this product!

  1. Routing the lines 5 Star Review

    Posted by on 22nd Jun 2018

    SAFETY : bleed line pressure if any, don’t smoke, use appropriate jack stands and chok wheels. Remove front drivers wheel to create access. Uninstall defective line set. (squeeze plastic connections to remove no special tools required). Guide rear section of front line set down around rack/pinion and subframe. Then carefully guide engine connections up past brake booster( hard lines may require slight bending ). Trim vapor line to needed length make the connection and attach the supply/return. Install gang line plastic clips. Complete rear line set install. Tighten all fittings using flare nut wrenches and engage quick connectors (no special tools needed with quick connections, line up tabs and push with light pressure, I use a very light amount of WD40 on dry lines).With an assistant start engine and inspect for leaks. Have fun with the money you saved.

Other Parts You May Need

Find Similar Products by Category